AUTOMOTIVE UPHOLSTERY

CORRECTED GRAIN LEATHER, CHROME TANNING.

Leather looks like:

· Uniform and adequate turning

· Do not crop leather fatty substances or salts.

· Do not smudged by the side flower

· The color and the engraving must have uniform characteristics in each piece and the set pieces that make up a batch or production order.

I0-OAP OPORTO F-150	I0-FRP OPORTO NEGRO MATE	I0-HQP OPORTO BURBUJA
I0-ILP OPORTO BEIGE ALMENDRA	I0-JWP OPORTO BEIGE ADOBE	I0-JYP BEIGE ARENA
I0-K4P OPORTO AZUL PRADO	I0-KNP OPORTO GRAFITO	I0-OLP OPORTO BEIGE ALMENDRA

Technical Specifications:

A. - Thickness: Minimum: 1.1 mm, Maximum: 1.3mm.

2. - Abrasion resistance (Taber): At least 4 grayscale (4,000 cycles of abrasion, CS10 stone and 500 grams of weight). Minimum 4 grayscale (300 cycles of abrasion, stone H18 and 500 grams of weight).

3. - Rub Rub Wet and Dry: Minimum: 4 according to the grayscale.

5. - Deflection: Minimum: 60000 cycles.

6. - Tack: Maximum: 2 corresponding scale.

7. - Smoothness: Minimum: 3 in corresponding scale.

8. - Color: Difference between standard sample and production of less than 0.7%.

9. - Mass: Minimum: 750 g/m2, Maximum: 950 g/m2. The process according to NTC 3456.

10. - Lightfastness: Minimum 4 in gray scale, or at least 5 blue scale.

11. - Flammability: Tour of the flame, Maximum: 8 inches. (20.3 cm) flame time, Max: 15 sec. Drips, Max 5 sec.

12. - Elongation at Break: Minimum: 10% Maximum: 40%

13. - Tensile Strength (n/30 mm): Minimum: 392.

14. - Strain at Load Set (8 kgf): Minimum: 5%, maximum: 20%

15. - Residual Distortion: Maximum: 10%.

16. - Tear Resistance: Minimum: 49 N.

17. - Accession of Finish: Minimum: 650 grf.

18. - Brightness: Gloss Meter With guarantee the degree of brightness of our automotive leather upholstery and uniformity across the surface.

19. - Stiffness: (mm) 55 + - 25.

20. - Rubbing Veslic: Dry: 500 cycles, Wet: 250 cycles, Wet Sweat Solution: 80 cycles.